Call NowGet Free Estimate
Murfreesboro Premium Concrete, Expert Advice

Concrete Patio Cost in Murfreesboro, TN, What to Expect in 2026

By Murfreesboro Premium Concrete  ·  Murfreesboro, TN  ·  Middle Tennessee  ·  Updated 2026

Concrete patio cost in Murfreesboro TN: price per sq ft, stamped vs plain, size estimates, and what drives the final number.

A concrete patio is one of the most popular home improvement projects in Murfreesboro, and for good reason, properly installed, it adds usable outdoor space, boosts property value, and outlasts pavers or wood decking by decades. But what does it actually cost?

This guide covers typical concrete patio pricing in Murfreesboro, TN, the variables that affect your final number, and how to evaluate the quotes you receive.

Average Concrete Patio Cost in Murfreesboro, TN

For a standard broom-finish concrete patio in Murfreesboro, expect to pay $8–$15 per square foot installed. That includes excavation, forming, concrete pour, and a basic finish. Here are typical ranges by size:

Patio SizeSq FtLow EstimateHigh Estimate
Small (10×10)100 sq ft$900$1,600
Medium (12×16)192 sq ft$1,700$3,100
Standard (16×20)320 sq ft$2,800$5,100
Large (20×24)480 sq ft$4,200$7,600
Extra-large (20×30+)600+ sq ft$5,400$10,000+

What Affects the Price in Middle Tennessee

Middle Tennessee summers are hot and humid, concrete needs proper curing and sealing to handle the temperature swings between seasons. Here's what moves the needle on patio cost locally:

  • Site prepGrading, excavation depth, and base compaction add cost but are critical for long-term performance. Expect $500–$1,500 for significant grading work.
  • ThicknessStandard patios are 4 inches. Heavier use areas or hot tubs need 5–6 inches. Each extra inch adds roughly $1–2/sq ft.
  • Finish typePlain broom finish is the base price. Stamped concrete adds $4–8/sq ft. Exposed aggregate adds $2–4/sq ft.
  • Shape complexityStraight edges are cheaper than curves or irregular shapes, which require more forming time.
  • AccessTight backyard access (no direct truck access) adds $300–$800 for wheelbarrow pours.

Finish Options and What They Cost

  • Broom finishTextured, slip-resistant, most affordable. No premium over base price.
  • Exposed aggregateDecorative stone surface. Add $2–4/sq ft.
  • Stamped concreteMimics stone, brick, or wood. Add $4–8/sq ft. Requires resealing every 2–3 years.
  • Colored concreteIntegral pigment or stain. Add $2–5/sq ft depending on method.
  • Smooth trowel finishCleaner look for covered patios. Slightly slippery when wet; often combined with light texture.

Permits in Murfreesboro, TN

Most residential concrete patios in Murfreesboro don't require a building permit if they're ground-level and not attached to the house structure. However, patios over a certain size, elevated decks with concrete footings, or any work near property lines may require approval. Always ask your contractor to confirm permit requirements for your specific address before work begins.

Questions to Ask Your Contractor

  • What is the proposed concrete mix (PSI rating)?
  • What base preparation is included, depth, material, compaction?
  • Will control joints be saw-cut or tooled, and at what spacing?
  • What is the curing method and curing time before foot traffic?
  • Does the quote include final cleanup and haul-away of form materials?

This guide was prepared by the team at Murfreesboro Premium Concrete, a licensed concrete contractor serving Murfreesboro and Middle Tennessee since 2006. For project-specific pricing, request a free estimate.

Ready to Get a Quote for Your Murfreesboro Project?

Free on-site estimate. Written proposal. No commitment required. We respond within 24 hours.

Get Your Free Estimate →